Available in 5 kg, and 25 kg PE lined paper bags.

Joints should be clean, dry, and free from loose particles. Joint depth should appear uniform.
For grouting tiles with a polished or rustic finish, Alfix Cerafill 10 or Cerafill 10 colour should be used.
For joint widths exceeding 10 mm, Alfix Cerafill 15 quick or Alfix Cerafill 20 should be used.

Usually, grouting can be made 48 hours after completion of fixing. Add 0.24 – 0.27 litres of clean water per kg powder. Pour the water into a clean container and add the powder while stirring thoroughly with mixing drill until a lump-free and smooth grout is obtained. Allow the mixture to rest for a few minutes before use.

Apply Alfix Cerafill 5 colour to the surface with a soft rubber squeegee while working diagonally over the joints ensuring that they are completely filled. Remove excess grout immediately while working.
When the grout begins to set, after approx. 15 – 50 minutes, start to slurry off the area using wet sponge frequently rinsed in clean water. Wipe over tiles in broad sweeps until joints appear even and filled. Finally, clean off and finish tiles and joints with only slightly damp sponge.
Any remaining grout film on the surface can be removed after 12 – 24 hours using an acid cleaner, e.g. Alfix Acid Wash. In most cases cleaning with clean water, e.g. added vinegar, will be sufficient to remove grout film or efflorescence.
NB!
Switch off any underfloor heating
Note that the temperature of mixing water will influence setting time.
Protect the joints from heat, draught, and other climatic conditions which will cause premature drying. To prevent premature drying dampen joints for approx. 24 hours (use e.g. wet sponge) in order to obtain complete hardening.
Do not cover areas just grouted with plastic foil or sheets. Avoid any significant changes in temperature or humidity during hardening process.
Variations in drying conditions as well as heavy use of water when cleaning off may affect the cement and cause visible deviations in joint colour.
Not suitable for dry powder sprinkling upon grouting. 

IRRITANT

Grout residues on tiles and tools should be removed with water before the mix begins to set. Cement-based products harden when mixed with water, hence do not pour surplus adhesive into the drain system.

Enligt EN 13888

Product info on:
• Alfix Cerafill 5 colour
• Alfix Cerafill 10
• Alfix Cerafill 15 quick
• Alfix Cerafill 20
• Alfix Cleaning and Maintenance products
Product health and safety data /COSH

For further information, please consult our Technical Services Dept.