Available in 2,5 litres and 10 litres plastic containers.

The surface should be dimensionally stable, sound, and clean. Free from laitance, grease, and dust. There should be no blooms or crack formations. Residues from grease or soap can be removed with Alfix Deep Cleaner. Ensure that paint work is sound and not flaking. Rough-sand/matt smooth or dense surfaces.

For absorbent surfaces, such as concrete, dilute Alfix PlaneMixPrimer with clean water in the ratio 1:3. For smooth or dense substrates, wash/brush the surface using a mixture of Alfix PlaneMix Primer and levelling powder in the ratio 1:2.
Outdoors: prime with Alfix PlaneMixPrimer diluted 1:6 with water.
Apply Alfix Primer to the surface with use of broom, brush, or roller and work it well into the surface leaving no visible puddles.
Allow primer to dry before commencing further treatment.
Ensure a room temperature of min. +10°C.
Min. drying time at +20°C: 1 hour.
Should levelling imply several layers, priming before each new application is required.
For very absorbent surfaces, extra priming may be required.

NONE

Clean residues from tools with water before the primer sets. Once dried, primer can be removed mechanically or with solvent.
Wear protective gloves during work since the product tends to stick strongly to the skin.

Low emission, GEV-EMICODE EC1 - test defined by the German institute Gemeinschaft Emissionskontrollierte Verlegestoffe.

Levelling compounds - plane, smooth surfaces with Alfix
Wet rooms – Tanking with Alfix
Product info on:
• Alfix Deep Cleaner
• Alfix PlaneMix
Product health and safety data /COSH

For further information, please consult our Technical Services Dept.