Available in 10 litres plastic container.

Substrates of concrete
Ceramic tiles, terrazzo
Timber floors
Mastic asphalt
Vinyl and similar floorings
Steel
For further information and details, please contact our Service technical department.

The surface should be dimensionally stable, sound, and clean. Free from laitance, grease, and dust.
Concrete surfaces should be primed with PlaneMixPrimer diluted with water 1:3
On dense surfaces, apply contact layer of Alfix PlaneMixBinder and PlaneMix mixed 1:2. Alternatively, apply Alfix Epoxy Primer scattered with sand.
For priming of other surfaces, please contact our Service technical department.
Ensure a working temperature of min. +10°C.

Pour water and PlaneMixBinder into a clean container and mix until the binder has been evenly diluted. Sprinkle in powder while stirring continuously. If possible, use large mixing container or drum for more bags at a time and mix until a lump-free, easy-flowing mix is obtained.

NB!
Addition of PlaneMixBinder to levelling compound requires that the original recommendable amount of water is reduced in accordance with the table shown in the above under the section: coverage. Addition of PlaneMixbinder to a levelling compound entails prolonged curing and a slight reduction in flow ability.

Should levelling imply several layers, priming before each new application is required. For very absorbent surfaces, extra priming may be required.

NONE.

Cleaning Tools and tiles should be cleaned with water before the compound sets.
Cement-based products harden when mixed with water, hence do not pour surplus PlaneMix into the drain system..

Det Norske Veritas AS:
Annex A.1, item No. A.1/3.1 “Primary deck coverings”
Identification number:   0575

Levelling compounds - plane, smooth surfaces with Alfix
Product info on:
• Alfix PlaneMixPrimer
• Alfix PlaneMix 10
• Alfix PlaneMix 20
• Alfix PlaneMix 50
• Alfix Epoxy Primer
Product health and safety data /COSH
 

For further information, please consult our Technical Services Dept.